Fujitsu LIFEBOOK Bay Projector, Operating Manual

Page: 13 / 105

Important notes English -
7
Fujitsu Technology Solutions 7
Important notes
In this chapter you will find information regarding safety which it is essential to take note of when
working with your device.
Safety notes
!
Pay attention to the information provided in the "Safety / Regulations" manual and in the
following safety notes.
•
Do not put the notebook on your lap or any other part of your body for a longer period of time.
The bottom of the notebook and of the Bay Projector will get hot. This may lead to burns.
•
Do not touch the air vents or any other hot surface of the Bay Projector while the Bay Projector
is running. This may lead to burns.
•
Do not put items close to the air vents of the Bay Projector or block the air vents while the Bay
Projector is running. The Bay Projector may overheat. Fire hazard!
•
Do not touch the lens of the Bay Projector. The edges of the lens are both hot and sharp, which
can lead to injuries.
•
Do not use the notebook and the Bay Projector in an unstable, wet or dusty environment.
•
Do not touch the connector of the Bay Projector.
•
Avoid shock and vibrations.
•
The laser lens is made of glass. Avoid impact to prevent the lens from breaking.
Laser safety
This device uses a Class 1 laser. It complies with Class 1 of the international laser product standard
IEC 60825-1.
!
Never look directly into the laser beam.
Never point a laser beam at a person, and do not allow children to use this product.
Transporting and positioning the device
•
Prior to extracting or retracting the Bay Projector, put your notebook on a desk or other stable,
even surface.
•
Prior to transporting the notebook, push the Bay Projector back into the bay. Otherwise
vibrations or impact may damage the Bay Projector.