136
- Configuration of the WLAN Device
Disconnecting Using the Icon in the Taskbar
Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit
and receive even though it’s not connected.
1
Right-click the WLAN icon in the taskbar at the bottom right of your screen.
2
Choose Disconnect from a network.
Activating the WLAN Device
Activation of the WLAN device can be accomplished using the same methods as the deactivation process
•
Using the [Fn]+[F5] key combination
•
In Windows, by right-clicking the WLAN icon then clicking “Connect to a network”
Configuration of the WLAN Device
The optional WLAN device can be configured to establish wireless network connectivity using the
software that is built into Windows. Support for most industry standard security solutions is contained in
this software.Pre-defined parameters will be required for this procedure. Please consult with your network
administrator for these parameters:
Configuring the WLAN Using Windows
1
Click the Start button, then select Control Panel.
2
If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network and
Sharing Center icon.
3
Select “Manage wireless networks” from the left panel.
4
Click on the [Add] button.
5
Depending upon what type of connection you would like to make, make a selection. For an infrastructure
network, select “Manually create a network profile. For ad hoc network, select “Create an ad hoc network”.
6
Enter the required information. You may need to consult with your network administrator for some information.
