Fujitsu LIFEBOOK A557 Operating Manual Download Page 59

Page: 59 / 75

Settings in BIOS Setup Utility

BIOS SetupUtility

Systemsettings,BIOSSetupUtility

Con

guration,BIOSSetupUtility

Setup

Systemcon

guration

Hardwarecon

guration

The

BIOS Setup Utility

allows you to set the system functions and the hardware

con

guration for the notebook.

When it is delivered, the notebook is set to factory default settings. You can
change these settings in

BIOS Setup Utility

. Any changes you make take effect as

soon as you save and exit the

BIOS Setup Utility

The

BIOS Setup Utility

program contains the following menus:

About

Displays information relating to the BIOS, processor and notebook

System

Advanced system settings

Advanced

Con

guration of various hardware components, such as mouse, keyboard,

processor

Security

Password settings and security functions

Boot

Con

guration of the start-up sequence

Exit

Exits the

BIOS Setup Utility

Starting the BIOS Setup Utility

►

Reboot the device (switch off/on or reboot the operating system).

BIOSSetupUtility

Depending on the

Fast Boot

setting in the

BIOS Setup utility

, the following

information may appear on the screen during start:

<F2> BIOS Setup <F12> Boot Menu

►

Press the function key

►

If a password has been assigned, enter the password and press the Enter key.

If you have forgotten the password, contact your system administrator
or contact our customer service centre.

The

BIOS Setup Utility

starts.

Fujitsu

Summary of Contents for LIFEBOOK A557












































































Search results

Summary of Contents for LIFEBOOK A557

Reviews:

Related manuals for LIFEBOOK A557

Brands by name

Popular brands

Fujitsu LIFEBOOK A557, Operating Manual

Search results

Summary of Contents for LIFEBOOK A557

Reviews:

Related manuals for LIFEBOOK A557

Brands by name

Popular brands