background image

3

FEATURES AND FUNCTIONS

O

Energy saving and Comfortable function

INVERTER

At the start of operation, large amount of power is used to 
bring the room quickly to the desired temperature. Afterwards, 
the unit automatically switches to a low power setting for eco-
nomic and comfortable operation.

ECONOMY OPERATION

When ECONOMY operation mode is operated, the room tempera-
ture will be little higher than the set-temp under cooling mode and 
lower than set-temp under heating mode. Therefore, the ECONO-
MY mode is able to save more energy than other normal mode.

OMNI-DIRECTIONAL AIR FLOW  
(SWING OPERATION)

3-dimensional control over air direction swing is possible through 
dual use of both an up/down air direction swing and right/left air 
direction swing. Since up/down air direction flaps operate auto-
matically according to the operating mode of the unit, it is pos-
sible to set air direction based on the operating mode.

SUPER QUIET OPERATION

When the FAN button is used to select QUIET, the indoor unit 
begins super quiet operation; the indoor unit’s airflow is re-
duced to produce quieter operation.

AUTO CHANGEOVER

The operation mode (cooling, dry, heating) is switched auto-
matically to maintain the set temperature, and the temperature 
is kept constant at all times.

10 °C HEAT OPERATION

The room temperature can be maintained at 10°C so as to 
prevent the room temperature from falling too far.

O

Convenient function

PROGRAM TIMER

The program timer allows you to integrate OFF timer and ON 
timer operations in a single sequence. The sequence can in-
volve 1 transition from OFF timer to ON timer, or from ON 
timer to OFF timer, within a 24 hour period.

SLEEP TIMER

When the SLEEP timer button is pressed during heating mode, 
the air conditioner’s thermostat setting is gradually lowered dur-
ing the period of operation; during cooling or dry mode, the ther-
mostat setting is gradually raised during the period of operation. 
When the set time is reached, the unit automatically turns off.

O

Clean function

REMOVABLE AIR FILTER

The indoor unit’s air filter can be removed for easy cleaning 
and maintenance.

MILDEW-RESISTANT FILTER

The air filter has been treated to resist mildew growth, thus  
allowing cleaner use and easier care.

O

Remote controller

WIRELESS REMOTE CONTROLLER

The wireless remote controller allows convenient control of air 
conditioner operation.

WIRED REMOTE CONTROLLER (OPTION)

The optional wired remote controller can be used.
When you use remote controller, there are following different
points as compared with using wireless remote controller.

[The additional functions for wired ones]
• Weekly timer
• Temperature set back timer

And you can use both wired and wireless remote controller 
simultaneously.
(But function is limited)

When the restricted functions on the remote controller are 
used, beeping sound will be heard, OPERATION, TIMER and 
the 3rd lamp of the indoor unit will flash.

[The restricted functions for wireless ones]
• SLEEP timer
• TIMER (ON timer, OFF timer and program timer)
• 10 °C HEAT operation

SAFETY PRECAUTIONS

M

This appliance is not intended for use by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning use of the appliance by a 
person responsible for their safety. 

  Children should be supervised to ensure that they do not play with the appliance.

M

If you see lightning or hear thunder, there might be a lightning strike. To prevent electric 
shock hazard, turn off the air conditioner by using the remote controller, and do not 
touch the unit or the power plug during thunderstorm.

M

Do not place any other electrical products or household belongings under indoor unit or 
outdoor unit. Dripping condensation from the unit might get them wet, and may cause 
damage or malfunction of your property. 

M

Keep clean and tidy around the outdoor unit, and do not place the things around it. If it is 
covered with fallen leaves, there could be an infiltration of small animals or insects whose 
contact with the internal electrical components leads to the product malfunction. 

M

Do not stand on unstable steps when operating or cleaning the air conditioner. It may 
overturn and can cause the injury.

CAUTION

Summary of Contents for Inverter ABTG54LR





















Reviews: