9
Refit the front panel in the following manner
1
Firstly the front panel is inset in two upper hooks and
secondly it’s inset in two lower hooks.
The moving pole is inserted in a link plate surely.
2
Adjust the position so that the light of the unit’s display
could be seen from the front panel’s display. After adjusting,
fasten the screws.
Cleaning the Indoor Unit
Clean the indoor unit by wiping with a cloth dipped in cool or warm water, then wipe with another soft, clean, dry cloth.
Before cleaning the unit, be sure to stop the unit and disconnect the power supply.
1. Disconnect the power plug.
2. Turn off the electrical breaker.
A fan operates at high speed inside the unit, and personal injury could result.
●
How to Remove and to Refit the Front Panel
WARNING
In the work of this item, the authorized service personnel should work.
Remove the front panel in the following manner
1
Remove the fixing screw.
2
Hold up the front panel with your hands to remove it.
When Not Using the Unit for Extended Periods (One Month or More)
Operate the unit on fan mode for about one-half day on a day with clear weather, to assure that the internal parts are dry.
When not using the unit for extended periods, disconnect the power plug for safety.
Check the Power Cord
WARNING
If the power supply cord is damaged, it must be replaced by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard.
Check the power cord occasionally to confirm that it is not damaged by cuts or abrasions.
Inspections and Repairs
Depending on the conditions of use, the internal parts of an air conditioner will become dirty after about two or three
seasons of use, and performance may be affected. For this reason, regular professional maintenance is recommended.
Consult authorized service personnel.
Fixing screw
Front panel
Upper hook
Moving pole
Link plate
Lower hook
9385175273-02_OM.indb 9
20/12/2011 15:50:56
