background image

En-14

3. Re-attach the air 

fi

 lters to the intake grille.

The air 

fi

 lters 

fi

 t onto the inside of the intake grille. 

  Dust can be cleaned from the air 

fi

 lter either with a 

vacuum cleaner, or by washing the 

fi

 lter in a solution of 

mild detergent and warm water. If you wash the 

fi

 lter, 

be sure to allow it to dry thoroughly in a shady place 
before reinstalling.

  If dirt is allowed to accumulate on the air 

fi

 lter, air 

fl

 ow will 

be reduced, lowering operating ef

fi

 ciency and increasing 

noise.

Cleaning the Air Filter

1.  Pull the air 

fi

 lters upward to remove them.

 

Remove the air 

fi

 lters by raising its handle while pulling it out 

towards you.

2. Clean the air 

fi

 lters.

 

Remove the dust from the air 

fi

 lters by vacuuming or washing 

them. After washing, allow the air 

fi

 lters to dry thoroughly in 

an area protected from sunlight.

Air 

fi

 lter

Filter Reset (ECONOMY Indicator Lamp 

fl

 ashing/The special setting)

  

Can be used if set correctly during installation. 

Please consult authorized service personnel when using this function.

•  It lights on when it is time to clean the air 

fi

 lters.

After turning the power on, press the MANUAL AUTO button for 2 seconds or less on the indoor unit.

CLEANING AND CARE

CAUTION

  When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit be 

inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.

  When cleaning the unit’s body, do not use water hotter than 40 °C, harsh abrasive cleansers, or volatile agents like benzene or 

thinner.

  If the unit will not be operated for a period of 1 month or more, be sure to allow the inner parts of the unit to dry thoroughly, in 

advance, by operating the unit in fan mode for half a day.

 

Before cleaning this product, be sure to turn it off and disconnect all the power supply.

  The fan operates at high speed inside the unit, and could result in personal injury.

  Be careful not to drop the intake grille.

 As 

fi

 lter cleaning involves work in high places,  please consult authorized service personnel.

  Do not expose the unit body to liquid insecticides or hairsprays.

 

OM 01_9374379736-02_en.indd   14

OM 01_9374379736-02_en.indd   14

2/24/2559 BE   20:16

2/24/2559 BE   20:16

Summary of Contents for General ABG30UIA-LR


















Reviews: