System expansions
English - 35
Removing the Power over Ethernet module
PoweroverEthernetmodule,
►
Open the casing (see
"Opening the casing", Page 20 - English
).
►
If a PCI or PCIe board is installed, remove the cross piece and PCI or PCIe
board (see
"Removing the board", Page 38 - English
).
1
1
2
►
Undo the screws (1).
►
Pull the Power over Ethernet module in the direction of the arrow (2) out
of the slot and lift it out of the casing.
►
Reinstall the cross piece and the PCI or PCIe board if necessary (see
"Installing the board", Page 36 - English
).
►
Close the casing (see
"Closing the casing", Page 21 - English
).
Ensure that cables are not trapped between the casing and the components.
Fujitsu Technology Solutions
77
