System expansions
English - 25
Removing the SmartCard reader
SmartCardreader
►
Open the casing (see
"Opening the casing", Page 20 - English
).
►
If a PCI or PCIe board is installed, remove the cross piece and PCI or PCIe
board (see
"Removing the board", Page 38 - English
).
1
2
4
3
3
►
Disconnect the cable from the SmartCard reader (1) and from the mainboard (2).
►
Undo the screws (3).
►
Lift the SmartCard reader from the carrier (4).
►
Reinstall the cross piece and the PCI or PCIe board if necessary (see
"Installing the board", Page 36 - English
).
►
Close the casing (see
"Closing the casing", Page 21 - English
).
Ensure that cables are not trapped between the casing and the components.
Fujitsu Technology Solutions
67
