System expansions
System expansions
Upgrades,
Device,
Systemexpansion
Components
Servicing
Repairs to the device must only be carried out by quali
fi
ed technicians.
Unauthorised opening or incorrect repair may greatly endanger the user (electric
shock,
fi
re risk) and will invalidate your warranty.
After consulting the Hotline/Service Desk, you may remove and install the
components described in this manual yourself.
If you remove or install components without consulting the Hotline/Service
Desk, then the warranty of your device will become void.
As the device has to be shut down in order to install/deinstall system hardware
components, it is a good idea to print out the relevant sections of this chapter beforehand.
The following illustrations may differ slightly from your device, depending on its con
fi
guration level.
If further documentation was delivered with your device, please also read this through carefully.
In addition, before removing or installing system components, please pay attention to the following:
The device must be switched off when installing/removing the system
expansions and may not be in energy-saving mode.
Remove the power plug before opening the device.
Be careful that no wires become trapped when removing or installing components.
When installing components that become very hot, make sure that the
maximum permissible temperature is not exceeded.
An update of the BIOS may be required for a system expansion or hardware
upgrade. Further information can be found in the BIOS help section or if
necessary in the Technical Manual for the mainboard.
20
Fujitsu Technology Solutions
