3
FTP-631MCL301/302
24 VDC
±
5%, average:*
2
0.33 (1.72) A (at 25 mm/s printing speed, 25% printing ratio)
For head
0.64 (2.58) A (at 50 mm/s printing speed, 25% printing ratio)
2.37 (4.29) A (at 100 mm/s printing speed, 25% printing ratio)
(
): Peak
For motor
24 VDC
±
5%, 1.0 A maximum
For logic
5 VDC
±
5%, 0.5 A maximum
Weight
Mechanism with cutter: approx. 540 g. Interface board: approx. 100 g
Mec cutter
132 (W)
×
60 (D)
×
71.0 (H) mm (excluding connector)
Interface board
140 (W)
×
89 (D)
×
24.0 (H) mm
Pulse durability : 1
×
10
8
pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Wear resistance : 50 km (at 25% printing ratio)
Cutter
Cutting life: 3
×
10
5
times
Operating temperature
+5 to +40
°
C*
3
Operating humidity
20 to 85% RH (no condensation)
Storage temperature
–20 to +60
°
C (excluding paper)
Storage humidity
5 to 95% RH (no condensation)
Head temperature
By thermistor (applied energy control, abnormal temperature detection)
Detection
Paper out/Mark detect
By photointerrupter (command set)
Head-up
By microswitch
Paper width
85 mm
1 ply paper in roll
:
FTP-030P0020
Thicker paper in roll
:
FTP-030PJ102*
4
Specifications
Item
(Continued)
Power supply
Dimensions
Thermal head
Life
Environmental
conditions
+0
–1
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*2: At 25
°
C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40
°
C.
*4: Printer mechanism FTP-631MCL302 is to be used.
*5: Please contact us for other thermal papers.
Recommended thermal sensitive
paper*
5
