11
FTP-623MCL400/FTP-623DCL002
Name
Command
Contents
Carriage return
LF, CR
Prints buffer data and returns the line.
Double width print set
SO
Sets the double width character.
Power-down mode set
DC2, DC3
Reduces power consumption during stand by.
Double width print reset
DC4
Resets the double width character.
ESC sequence entry
ESC
Indicates the start of an escape sequence formed
by this code plus subsequent commands.
Line space set
ESC A + n
Sets the line space length in 2
×
(0 to 255 dot
lines).
Paper feed set in normal direction
ESC B + n
Sets the paper feed in normal direction.
(Feeding range: 2
×
(0 to 255 dot lines))
Bit image print set
ESC K +n
1
+n
2
+n
3
Sets the bit image printing in single or double
density mode.
International character set
ESC R+n
Selects the international characters.
Download character register
ESC &+n
1
+n
2
+~
Registers the download characters of 12
×
6 or 16
×
8 dots.
Printing quality set
ESC Q+n+SP*+~
Sets the printing quality conforming to selected
paper.
Printing density set
ESC Q+n+!+A
Sets the printing density mode.
(Single density standard, reduced, or double
density)
Paper feed set in reverse direction
ESC j+n
Sets the paper feed in reverse direction.
(Feeding range: 2
×
(1 to 255 dot lines))
Character grade set
ESC x+n
Sets the character grade in standard or high
grade.
Special character print set
ESC ¥+n
Prints special characters.
Start position set for bit-image printing
ESC 1+n
Sets the print start position of bit-image printing at
the left end.
Detecting function set
ESC 9+n
Sets the detecting function.
Mark detection
ESC FF
Feeds the paper to the marking position.
Line feed length set after mark detection ESC w+n
Sets the line feed length after mark detection.
Automatic paper loading length set
ESC EM+n
Sets paper feeding length for automatic paper
loading.
Automatic printing speed set
ESC s+n
Sets the function mode in the automatic printing
speed set.
Printer initialization
ESC @
Initializes the printer MPU.
■
PRINTING COMMANDS (CENTRONICS STANDARD INTERFACE)
Notes:
*: “SP” means the space code (20H).
Bus interface uses different commands.
