Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 1 1BProduct Overview
1 Product Overview
This product is an Easy Kit for MB95200 series. It is composed of an Easy BGMA and an
Easy EV-board. Combining the SOFTUNE Workbench on PC, the Easy Kit enables the
quick start of development before the user system is ready.
1.1 Objective and Deliverable
The Easy Kit provides users a simple development platform. Before using the Easy Kit,
make sure that the following devices are ready:
9
Easy
Kit
(FMCDC-MB95260H-EK-01)
1PCS
9
Quick Start Guide
1PCS
User could download SOFTUNE and MB95200 Sample Code from the following address,
http://www.fujitsu.com/cn/fss/services/mcu/tools.html
An USB extension cable (A-plug to A-jack) is optional if direct USB connection to PC is
inconvenient.
1.2 System Block
To setup a debugging system, connect PC and an Easy Kit together as shown below:
Figure 1-1: System Block
1.3 Handling Precautions
The Easy Kit can be used in connection with its bundled products. To ensure correct use of
this product in a proper environment, observe the following guideline:
Follow the instructions described in each manual for the bundled product to use this
product.
MCU-AN-500059-E-12 – Page 4
