Fujitsu Fi-7030, Operator'S Manual

Page: 94 / 163

Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
94
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Multifeed error occurs frequently.
Do the documents meet the requirements described in
"Precautions" in
"Conditions" (page 35) ?
No
Use documents that meet the requirements.
For details, refer to
"2.2 Documents for Scanning" (page 35) .
Yes
Are you using the Carrier Sheet?
Yes
In the scanner driver, configure the scan settings for using the Carrier Sheet
(
"Documents Larger than A4 Size" (page 51) or "Scanning Photographs and
Clippings" (page 53) ).
No
If multifeed detection is enabled, does the batch of
documents fulfill the conditions for an accurate detection?
No
Fulfill the conditions for an accurate multifeed detection.
For details, refer to
"Conditions for Multifeed Detection" (page 39) .
Also specify the multifeed detection area if necessary ( "Specifying the Area to
Detect Multifeed [Document check area specification for Multifeed Detection]"
(page 134)
).
Yes
Did you scan a plastic card or any other thick document?
Yes
To scan such a document, disable the multifeed window display function of the
scanner driver, the intelligent multifeed function, or the multifeed detection setting.
No
Did you fan the documents before loading them?
No
Fan the documents before loading them.
Yes
Have the documents just been printed out from a copy
machine or a laser printer?
Yes
Fan the documents a few times to remove static electricity.
No
Are the consumables (*1) installed correctly?
No
Install the consumables (*1) correctly.
For details, refer to
"Chapter 6 Replacing the Consumables" (page 72) .
Yes