Fujitsu Fi-7030, Operator'S Manual

Page: 35 / 163

Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
35
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Contents
Paper Size
The following paper sizes can be scanned:
*1: Depending on the application or the scan settings for the scanner
driver, there may be insufficient memory to perform scanning.
Long page scanning supports documents with a length of up to
5,588 mm (220 in.) when the resolution is set to 200 dpi or less.
Conditions
Paper Type
The following paper types are recommended:
 Wood-free paper
 Wood-containing paper
 PPC paper (recycled)
 Plastic card
When using paper types other than the above, make sure to test with
the same type of paper first to check if the document can be scanned.
Paper Weight (Thickness)
The following paper weights can be used:
 40 to 209 g/m
2
(11 to 56 lb)
 127 to 209 g/m
2
(34 to 56 lb) for A8 size
 0.76 mm (0.03 in.) or less for plastic cards (embossed cards can be
used)
Precautions
The following types of documents may not be scanned successfully:
 Documents of non-uniform thickness (such as envelopes or
documents with attachments)
 Wrinkled or curled documents
 Folded or torn documents
 Tracing paper
 Coated paper
 Carbon paper
 Photosensitive paper
 Perforated documents
 Documents that are not square or rectangular
 Very thin paper
 Photographs (photographic paper)
2.2 Documents for Scanning
ADF  Maximum size (width × length)
- A4 (portrait) (210 × 297 mm/8.3 × 11.7 in.)
- Legal (8.5 × 14 in.)
- Long Page (*1)
(216 × 863 mm/8.5 × 34 in., 216 × 5,588 mm/
8.3 × 220 in.)
 Minimum size (width × length)
50.8 × 50.8 mm/2 × 2 in.