Fujitsu fi-6800 Consumable Replacement And Cleaning Instructions Download

Page: 2 / 26

fi-6800 C

ONSUMABLE

EPLACEMENT

AND

LEANING

NSTRUCTIONS

ONSUMABLES

IST

Description

Qty

Life

Fujitsu P/N

Pick Rollers

1 Set

600,000

PA03575-K011

Separator Roller

600,000

PA03575-K012

Brake Roller

600,000

PA03575-K013

Note:

To insure the longest possible consumable life, it is strongly
recommended that all the consumables listed above be replaced at
the same time.

Not replacing all the consumables at the same

time will decrease the life of the consumables.

NCR or Carbonless paper has chemical composition which damages
the consumables listed above. Cleaning of these items will be
needed more frequently to avoid feed problems. Also their life will be
reduced if this paper is scanned.

Pick Rollers

Brake Roller

Separator Roller

Summary of Contents for fi-6800



























Search results

Summary of Contents for fi-6800

Reviews:

Related manuals for fi-6800

Brands by name

Popular brands

Fujitsu fi-6800, Consumable Replacement And Cleaning Instructions

Search results

Summary of Contents for fi-6800

Reviews:

Related manuals for fi-6800

Brands by name

Popular brands