Fujitsu FI-5530C2, Operator'S Manual

Page: 129 / 168

114
*1) For details, refer to "6.2 Document Quality" on page 123.
*2) For details, refer to "2.3 Scanning Thin Documents" on page 37.
*3) For details, refer to "4 REPLACING CONSUMABLES" on page 85.
*4) For details, refer to "3.2 Cleaning the ADF" on page 80.
Use documents that satisfy
the requirements. (*1)
NO
YES
Were the documents fanned
before loading into the ADF paper
chute?
NO
Fan the documents before
loading, or reduce the
number of sheets of the
documents.
YES
Symptom10
The ADF have frequent troubles not picking
documents.
Do the documents satisfy the
conditions described under the
"Precautions" in "6.2 Document
Paper Quality"?
NO
Set the paper thickness switch
to the "Normal" position. (*2)
Is the paper thickness switch set
on the "Normal" position?
YES
Are all the cons u ma b les
(Pick roller and Pad ASSY)
installed correctly?
N O Correctly install the
cons
u ma b le(Pick roller and
Pad ASSY), if needed. (*3)
Is any of cons u ma b les
(Pick roller, Pad ASSY) dirty?
YES
Clean the dirty cons u ma b le.
(*4)
YES
Is any of cons u ma b les (Pick roller
and Pad ASSY) w orn o u t? (Check
the cons u ma b le co u nter)
Replace the cons u ma b le,
if needed. (*3)
N O
YES
N O
If yo u cannot sol v e the pro b lem
after taking meas u res, check the
items in "5.4 Items to check b efore
contacting the dealer w here yo u
b o u ght the scanner" and contact
the dealer or an a u thorized
FUJITSU ser v ice pro v ider.