manualshive.com logo in svg

Fujitsu fi-4640S, Operator'S Manual

Share
Download
Fujitsu fi-4640S Operator'S Manual Download Page 77

 7-10

9.  Option (IPC/Imprinter) Status Display

<Screen 49>

1 Press “Next”  

 or “Previous” 

 and let the

scanner display Screen 49.

2 Screen 49 indicates that the IPC-4D option is

installed.

<Screen 49-1> (An example)

Screen 49-1 indicates that the IPC-4D option
is not installed.

<Screen 49-2> (An example)

Screen 49-2 indicates that the IPC-4D option
and the fi-475PR (Imprinter) option are
installed.

3 Press 

 to return.

10.  SCSI ID Setting

<Screen 50>

1 Press “Next”  

 or “Previous” 

 and let the

scanner display Screen 50.

2 At Screen 50, press 

 or 

 to select SCSI

ID. Then press 

 to activate the setting.

3 Press 

 to return.

11.  SCSI Terminator Setting

<Screen 51>

1 Press  “Next”  

 or “Previous” 

 and let the

scanner display Screen 51.

2 At Screen 51, press 

 or 

 to select

Terminator. Then press 

 to activate the

setting.

3 Press 

 to return.

Summary of Contents for fi-4640S





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands