manualshive.com logo in svg

Fujitsu FD-1000ST, User Manual, Page: 21 / 36

Share
Download
Fujitsu FD-1000ST User Manual Download Page 21

 

1 7

 

 

Adjusting the Monitor 

 
The five buttons and two LED's on the monitor are explained in order from left to right. 
 

 

 
Power button: 

Push this button to turn on the power to the monitor. 
Also, pushing this button while the monitor is on cuts the 
power to the monitor. 

Power lamp (green): 

This lamp lights when the power to the monitor is on and 
goes out when the power to the monitor is off. 

Indicator lamp (orange): 

This lamp lights when the monitor is in energy-saving 
mode. 

Menu button: 

Push this button to adjust the monitor. 

▼

Button: 

Push this button to select OSD menu items (downward). 

▲

Button: 

Push this button to select OSD menu items (upward). 

Auto Button: 

Push this button to adjust the window's position, phase, 
and clock automatically. 

 
 

You can eliminate screen noise by adjusting the              Phase on 
the setting menu. 

 
 
 

Be careful when applying a strong force to the equipment, when 
the Console Drawer is pulled out, or the monitor is opened and 
being used, as there is a risk that the rack may fall over. 
Do not strongly press on the monitor's screen, scratch it with 
sharp objects or place magnetic objects near it. Doing so may 
damage the monitor. 

 

 

CAUTION

 

Summary of Contents for FD-1000ST





































Reviews:

No comments