MB2147 – Installation Guide
Chapter 2 Setting up the Emulation System
© Fujitsu Microelectronics Europe GmbH
- 9 -
MCU-AN-390070-E-V29
2 Setting up the Emulation System
HARDWARE INSTALLATION
2.1 Installing the emulator system
Attention:
Be sure that the system is
not
connected to any power supply, when connecting
or disconnecting components to and from it.
2.1.1 Adapter Boards
There exist two different Adapter Boards:
•
MB2147-10 for PGA256 MCUs
•
MB2147-20 for PGA299 MCUs
Please refer to the table in the appendix, for which devices what board should be used.
MB2147-20
MB2147-10
Figure 2-1: Main-Clock
The white arrow marks the crystal-area of the Main-Clock.
The DIP-switches and jumpers are identical for both Adapter Boards.
