Fujitsu F2MC-16L Series User Manual Download

Page: 24 / 68

CHAPTER 2 Developing Application Systems

2.6

Development Steps

Table 2.6 lists the steps required to develop an application system for REALOS/907.
Figure 2.6 shows the development procedure for REALOS/907.

■

Development steps

Table 2.6 lists the application development steps and the required software.

Table 2.6 REALOS/907 Development Steps and Required Software

Development Steps

Description

Software

System design

Design the system. Determine the required
hardware and whether or not to use REALOS/
907 in this step.

Select target hardware

Determine the hardware on which the
application system is to run.
New hardware may need to be developed.

Prepare development
environment

Configure the REALOS/907 development
environment on a host computer.

Develop and debug
programs

Design and develop the task and handler
programs based on the system design
specifications
Perform independent debugging of tasks and
handlers.

C compiler, assembler,
linkage kit, simulator
debugger

Configure system

Configure the independently developed task and
handler programs as a REALOS/907 application
program.

Configurator, C
compiler, assembler,
linkage kit

Run and debug
application system

Run the resulting REALOS/907 application
system on the target hardware and perform
system debugging.

Emulator debugger,
Monitor debugger

Load in ROM

Load the REALOS/907 application system into
ROM using the ROM loading tools.

Communications
program for the ROM
programmer, Object
tool

Operation

Manage and operate the REALOS/907
application system.

Summary of Contents for F2MC-16L Series





































































Search results

Summary of Contents for F2MC-16L Series

Reviews:

Related manuals for F2MC-16L Series

Brands by name

Popular brands

Fujitsu F2MC-16L Series, User Manual

Search results

Summary of Contents for F2MC-16L Series

Reviews:

Related manuals for F2MC-16L Series

Brands by name

Popular brands