manualshive.com logo in svg

Fujitsu ETERNUS, User Manual, Page: 3 / 64

Share
Download
Fujitsu ETERNUS User Manual Download Page 3

ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-

3

Copyright 2009 FUJITSU LIMITED   

P2X0-0202-04ENZ0

Preface

This guide discusses procedures and safeguards relating to the use of ETERNUSmgr to config-             
ure ETERNUS DX400 series, ETERNUS DX8000 series,  ETERNUS2000,  ETERNUS4000,        
ETERNUS8000, ETERNUS3000, ETERNUS6000, or GR series device (hereafter referred to as          
a "ETERNUS Disk storage system" or "device"), as well as details of how to conduct mainte-               
nance on, display the status of, and monitor these devices.
This document is specifically written for ETERNUSmgr administrators and operators.
Knowledge of UNIX, Linux or Windows® system administration and Web server administration           
are required by this document.

Fourth Edition 

October 2009 

Structure of this Manual

This guide consists of the following 6 chapters.

•

Chapter 1   About ETERNUSmgr

This chapter explains the functions of ETERNUSmgr, its structure, and what other software is             
required to operate it.

•

Chapter 2   Setup

This chapter explains how to configure ETERNUSmgr and additionally explains  how  to           
monitor multiple machines with ETERNUSmgr.

•

Chapter 3   Startup and Shutdown

This chapter discusses how to startup and shutdown ETERNUSmgr.

•

Chapter 4   Control Interfaces (Top Menu)

This chapter explains the screens used by ETERNUSmgr.

•

Chapter 5   Cautions

This chapter explains important points to keep in mind when using ETERNUSmgr.

•

Chapter 6   Messages

This chapter explains the various messages displayed when setting up and using           
ETERNUSmgr.

Summary of Contents for ETERNUS

































































Reviews:

No comments