Chapter 5 Information Settings and Display
5.3 Maintenance > show port-error
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
652
show port-error
This command displays the details of disk errors. This command displays the error details of the SAS expander
ports (the interfaces linking controllers and disk enclosures). There are three ports for each expander module
and four PHYs for each port. For SAS, there are also ports and PHYs for the host interfaces.
■
Syntax
■
Parameter
No parameters.
■
Output
show port-error
# CLI>show port-error
# Expander Port PHY Status Invalid Disparity Loss of Dword PHY Reset
# Dword Error Synchronization Problem
# FE EXP#0 Port#0 PHY#0 Link Up 1 0 0 1
A B C D E F G H
A:
Expander Type
B:
Port Number
C:
PHY Number
D:
Link Status
E:
Invalid Dword Count
F:
Disparity Error Count
G:
Loss of Dword Synchronization Count
H:
PHY Reset Problem Count
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......