Chapter 5 Information Settings and Display
5.3 Maintenance > clear disk-error
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
651
clear disk-error
This command clears the disk error information. It is possible to clear the error information of specific disks.
■
Syntax
■
Parameter
■
Example(s)
clear disk-error [-disks
disks
]
-disks
Optional. This parameter specifies the disks to clear the error information from. One or more
disks can be specified at the same time. For details, refer to
. If
this parameter is omitted, the error information for all the disks is cleared.
The following example clears the error information for all the disks:
CLI>clear disks-error
The following example clears only the error information for disk#1 in the CE:
CLI>clear disks-error -disks 001
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......