Chapter 6
Monitoring Settings
Perform the ETERNUS DX Disk storage system monitoring setup if required.
For details on the settings, refer to "Configuration Guide (Web GUI)".
6.1
Event Notification Setup
Select whether to report events detected in the ETERNUS DX Disk storage system. There are six methods for
event notification: Host Sense Key Code Qualifier, SNMP Trap, E-Mail, syslog, REMCS, and AIS Connect.
The event notification setting is explained below.
1
On the navigation of the ETERNUS Web GUI screen, click [System].
The [System] screen appears.
2
In [Category], click [Event/Dump].
The [Event/Dump] screen appears.
3
In [Action], click [Setup Event Notification].
The [Setting based on Severity] tab screen of the [Setup Event Notification] screen appears.
4
In the [Setting based on Severity] tab screen, select the required items.
5
On the screens that are displayed by clicking each level tab, select the required items.
101
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
Summary of Contents for ETERNUS DX100 S3
Page 2: ...This page is intentionally left blank ...
Page 188: ......
