Fujitsu ETERNUS CS800 S5 User Manual Download Page 408

Page: 408 / 634

Hardware

Status

394

U41840-J-Z125-7-76

The

Host Bus Adapters

section displays the following information about each Fibre

Channel or SAS card:

●

Component

- The name of the Fibre Channel card or SAS card.

Click the name of the card to view detailed information for the card below.

●

Status

- The status of the Fibre Channel card or SAS card.

●

Normal

- (Green) The component is operating correctly.

●

Attention

- (Yellow) There is a problem with the component .

●

Failed

- (Red) The component has failed.

The

Fibre Channel Controller

SAS HBA

section displays the following information about

the ports in the selected Fibre Channel or SAS controller:

●

Component

- The number of Fibre Channel port or SAS card.

●

Value

- The throughput capacity of the port (if connected).

●

Status

- The status of the Fibre Channel port.

●

- (Green) The port is connected.

●

Down

- (Green) The port is not connected.

Network Ports

The

Network Ports

page allows you to view information about Ethernet ports in the system.

The ETERNUS CS800 includes six or eight Ethernet ports (depending on the configu-
ration).

To access the

Network Ports

page, on the

Details

page, click the

Network Ports

tab (see

Figure 238

Summary of Contents for ETERNUS CS800 S5



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800 S5

Reviews:

Related manuals for ETERNUS CS800 S5

Brands by name

Popular brands

Fujitsu ETERNUS CS800 S5, User Manual

Search results

Summary of Contents for ETERNUS CS800 S5

Reviews:

Related manuals for ETERNUS CS800 S5

Brands by name

Popular brands