Fujitsu ETERNUS AX Series, Manual

Page: 35 / 68

1. ETERNUS AX/HX Installation
Outlet/Socket Specifications
Site Planning Guide 35
■ AC100V Power Cords
AC100V power cords are used to connect devices to the NEMA 5-15R power socket type. These power cords can be
used if the specifications of the connection device allow AC100V.
Table 20 Specifications for AC100V Power Cords (IEC60320 C13 - NEMA 5-15P)
■ AC100V/AC200V Power Cords
AC100V/AC200V power cords are used to connect devices to the IEC60320 C13 power socket type. These power
cords can be used if the specifications of the connection device allow AC100V or AC200V.
Table 21 Specifications for AC100V/AC250V Power Cords (IEC60320 C13 - C14)
Usage
Plug type
(Socket)
Socket type
(Power supply unit)
Power cord
length
Voltage rating/current rating
Used for connection between
the ETERNUS AX/HX and the
socket
(IEC60320 C13 <-> NEMA 5-
15P) NEMA 5-15P IEC60320 C13 3.0 m 125V/15A
Usage
Plug type
(Socket)
Socket type
(Power supply unit)
Power cord
length
Voltage rating/current rating
Used for connection between
the ETERNUS AX/HX and the
socket
(IEC60320 C13 <-> IEC60320
C14) IEC60320 C14 IEC60320 C13 3.0 m 250V/10A
If these power cords are used for the AX2200 that is operating at AC100V, the current rating may be exceeded
depending on the configuration.
Before ordering these power cords, be sure that the current rating is not exceeded. Contact your sales represen-
tative if necessary.