Fujitsu ESPRIMO Q5 Series Operating Manual Download Page 49

Page: 49 / 61

System expansions

Prepare to remove components

Please observe the safety information in chapter

"Important notes", Page 9

Remove the power plug from the mains outlet!

►

Switch the device off.

The device must not be in energy-saving mode !

►

Remove all the cables from the device.

►

Place the device on a stable,

at and clean surface. If necessary, lay an anti-slip cloth

on this surface to prevent the device from being scratched.

Opening the casing

►

Turn the device over and place it on a stable,

at and clean surface. If necessary, lay an

anti-slip cloth on this surface to prevent the device from being scratched.

►

Press the release button on the rear of the device upwards (1) and at the same
time slide the casing cover in the direction of the arrow (2).

►

Lift the casing cover off the device (3).

Fujitsu Technology Solutions

Summary of Contents for ESPRIMO Q5 Series






























































Search results

Summary of Contents for ESPRIMO Q5 Series

Reviews:

Related manuals for ESPRIMO Q5 Series

Brands by name

Popular brands

Fujitsu ESPRIMO Q5 Series, Operating Manual

Search results

Summary of Contents for ESPRIMO Q5 Series

Reviews:

Related manuals for ESPRIMO Q5 Series

Brands by name

Popular brands