Preparation for use
8
A26361-K1001-Z220-1-7619, Edition 8
Setting up the device
!
When installing your device, please read the recommendations and safety notes in the
"Safety" manual.
The device should only be set up in the intended orientation, i.e. in a horizontal position.
We recommend that you place your device on a surface with good anti-slip qualities. In
view of the multitude of different finishes and varnishes used on furniture, it is possible that
the rubber or plastic feet of the device will mark the surface they stand on.
Do not expose the device to extreme environmental conditions (see "Technical data").
Protect the device from dust, humidity, and heat.
Make sure that the device is adequately ventilated. Never place the device on a soft
surface (e.g. carpeting, upholstered furniture, bed). This may block the air vents
underneath the device, which could cause damage to the device due to overheating.
Do not stack several devices on top of each other.
Connect the monitor, mouse and keyboard
The ports for the monitor, mouse, and keyboard are on the front and rear of the device.
i
You can only connect a USB mouse and keyboard to the device.
Monitor port (digital, analog with
adapter)
USB port, black
(USB mouse, USB keyboard)
Connecting the monitor
►
Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
►
Plug the data cable into the monitor port of the device.
Connecting USB mouse
►
Connect the USB mouse to one of the USB ports on the device.
Connecting USB keyboard
►
Plug the rectangular connector of the keyboard cable into the rectangular socket on the
underside of the keyboard.
►
Insert the flat rectangular USB plug of the keyboard cable into a USB port of the device.
