System expansions
Installing an accessible drive
►
Open the casing (see
"Opening the casing", Page 31
).
Accessible drive,
Drive,
►
If a slide-in module is
fi
tted, remove this
fi
rst. To do this, proceed in the same way as
when removing a drive (see
"Removing an accessible drive", Page 33
).
Do not dispose of the empty slide-in module. For cooling, protection against
fi
re, and in order to comply with EMC regulations, you must re
fi
t the empty
slide-in module if you remove the drive again later.
►
Take the new drive out of its packaging.
►
Make the desired settings on the new drive (if necessary, to the settings of
drives already installed as well (Master/Slave)).
2
2
1
►
Slide the drive into the casing (1). Make sure that the screw holes are aligned.
►
Fasten the drive in place with the screws (2).
►
Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.
►
Close the casing (see
"Closing the casing", Page 32
).
It may be necessary to modify the entry for the drive in the
BIOS Setup
.
34
Fujitsu Technology Solutions
Summary of Contents for ESPRIMO P4 Series
Page 1: ...System Operating Manual ESPRIMO P4xx P5xx PH3xx ...
Page 3: ......
