Fujitsu ESPRIMO P Operating Manual Download

Page: 58 / 70

System upgrades

A26361-K1007-Z230-1-7619, edition 1

Installing and removing the floppy disk drive

►

Open the casing (see "Opening the casing").

►

Remove the data and power supply connectors from the floppy disk drive.

►

Remove the screws (1) on the right side of the floppy disk drive.

►

Slide the floppy disk drive out of the casing in the direction of the arrow (2).

►

Slide the new floppy disk drive into the case opposite the direction of the arrow (2).

►

Fasten the floppy disk drive with the screws (1).

►

Fit the data and power supply connectors to the floppy disk drive. Make sure the polarity is
correct.

►

Close the casing (see "Closing the casing").

It may be necessary to modify the entry for the drive in the

BIOS Setup

Summary of Contents for ESPRIMO P







































































Search results

Summary of Contents for ESPRIMO P

Reviews:

Related manuals for ESPRIMO P

Brands by name

Popular brands

Fujitsu ESPRIMO P, Operating Manual

Search results

Summary of Contents for ESPRIMO P

Reviews:

Related manuals for ESPRIMO P

Brands by name

Popular brands