Fujitsu ESPRIMO P Operating Manual Download

Page: 18 / 70

Preparing for use

A26361-K1007-Z230-1-7619, edition 1

Connecting the mouse

Depending on the equipment level selected, your device will be supplied with a USB mouse or a
PS/2 mouse.

Connecting a USB mouse

►

Connect the USB mouse to one of the USB ports

on the device.

Connecting a PS/2 mouse

►

Connect the PS/2 mouse to the PS/2 mouse port

of the device.

If you do not attach a mouse at the PS/2 mouse port , you can disable the mouse
controller in the

BIOS Setup

in order to free the IRQ12 for a different application.

Connecting the keyboard

Depending on the equipment level selected, your device will be supplied with a USB keyboard or a
PS/2 keyboard.

Connecting a USB keyboard

Use the supplied keyboard cable only.

►

Plug the rectangular connector of the keyboard cable into the rectangular socket on the
underside of the keyboard.

►

Insert the flat rectangular USB plug of the keyboard cable into a USB port

of the device.

Connecting a PS/2 keyboard

Use the supplied keyboard cable only.

►

Plug the rectangular connector of the keyboard cable into the rectangular socket on the
underside of the keyboard.

►

Plug the round plug of the keyboard cable into the keyboard port

on the device.

Summary of Contents for ESPRIMO P







































































Search results

Summary of Contents for ESPRIMO P

Reviews:

Related manuals for ESPRIMO P

Brands by name

Popular brands

Fujitsu ESPRIMO P, Operating Manual

Search results

Summary of Contents for ESPRIMO P

Reviews:

Related manuals for ESPRIMO P

Brands by name

Popular brands