Preparing to Service Units
Additional Security in Encore S Series Units
Page 28 MDE-3893P Encore® and Eclipse® Series Owner’s Manual · December 2011
3
Place the lower panel door and lock it using the lower panel lock.
Figure 4-1: Security Latch - Open and Locked Positions
Place for
Padlock
(optional)
Open Position
Locked Position
Notes: 1) If you suspect that the main/printer/lower panel door key’s security has been
compromised, consider purchasing replacement locks for the units from Hudson
Lock Inc. (
). Ordering directly from the lock supplier will
ensure a strict control over the distribution of locks and keys, eliminating the
possibility of keys being taken or copied through the traditional distribution
channels. Hudson Lock can provide specific pricing and lead-time information
based on the requirements. You may contact Hudson Lock at 1-800-434-8960.
2) ASCs must be aware of any lock changes or added locks in order to service the unit.
The keys must be available to the ASCs.
Important Installation Information
To ensure that your equipment provides safe and reliable operation, verify the following:
• Hose breakaways for drive-off protection must be installed. For breakaways to properly
function, the pumps must be anchored to the island with bolts.
• Dispensers and some self-contained pumps must use Shear Valves. Refer to the local and
state codes.
• Proper operating and safety warning signs must be used at the station. Refer to the local
and state codes and consult the oil company.
• Station emergency stop buttons must be used. Refer to the state and local codes.
• Isolation relays must be used with dispensers. Refer to the national, state, and local codes.
• Shear Valve linkage must be free of obstructions so that the valve can close properly
during a fire or accident.
• Ensure that the installers follow all other requirements and recommendations in
MDE-3802 Encore & Eclipse Site Prep Manual, MDE-3985 Encore Installation Manual,
and MDE-3986 Eclipse Installation Manual.
