MDE-3893P Encore® and Eclipse® Series Owner’s Manual · December 2011
Page 7
Encore 300 and Encore 500
Introducing the Encore/Eclipse Series
3 – Introducing the Encore/Eclipse Series
This chapter provides illustrations of the Encore and Eclipse units and their components. Refer
to this chapter when you perform the procedures in this manual.
Encore 300 and Encore 500
The Encore 300 and 500 units, which are similar in appearance are shown below. However,
each series has its own hardware/software package. For information on programming the unit,
refer to “Programming Encore 300” in MDE-4732 Encore and Eclipse Series Owner’s
Programming Manual. All options may not be available on your unit.
Figure 3-1: Encore 300 and Encore 500 Units
PRESS
91
$
PRICE PER UNIT
U.S. REGULATIONS
PRESS
89
$
PRICE PER UNIT
U.S. REGULATIONS
PRESS
87
$
PRICE PER UNIT
U.S. REGULATIONS
Nozzle
CRIND Display
CIM Door Lock
Hose
Door Lock
Boot Area
Main Display
Breakaway
Shear Valves and Unions behind
Lower Panel (not shown)
Swivel
PPU Display and Grade
Select Buttons
Lower Panel
CRIND Device Printer
Cash Acceptor
Available but not
shown:
- Totalizer Option
- TRIND Option
- Scanner Option
CRIND Keypad and
Optional PPP
Card Reader
Recommended Location
of Static Electricity
Warning Label
Brand Advertising Panel
Location of Label for
Approved Vapor Recovery
(VR) Nozzles and Federal
Communications Commission
(FCC) Label
Serial Number Label (on
Units manufactured after
January 2003) is found
inside the CIM
Pump Handle (Lift to Start
Handle Units)
Manager’s Keypad (not
shown) can be found
behind the CIM door.
Serial Number Label (on Units Manufactured before January 2003)