Fujitsu Eclipse AVN52D Installation Manual Download

Page: 15 / 16

- 15 -

- Installation outside the vehicle (example) -

Choose an installation location where the GPS

antenna can be attached securely.

Remove the backing paper from the body

protective sheet and attach the sheet to the

vehicle.

Install the GPS antenna on top of the body

protective sheet.

Body protective
sheet (clear)

Route the GPS antenna wire to the main unit

while securing it with tape.

GPS antenna

Front of vehicle

Route the GPS antenna wire inside the vehicle's

trunk and secure it with tape.

Attach the waterproof cushion so that the GPS

antenna wire is flat against the weatherstrip when

the trunk lid is closed.

Route the GPS antenna wire while securing it

with wire ties.

To aid in sliding the waterproof cushion in finding

the desired mounting location, apply plain or

soapy water to the waterproof cushion.

Tip

Wire tie

Waterproof cushion

Front of vehicle

Weatherstrip

Front of vehicle

Route to
main unit

Español

Français

Italiano

Nederlands

Svenska

English

Tape

Summary of Contents for Eclipse AVN52D

















Search results

Summary of Contents for Eclipse AVN52D

Reviews:

Related manuals for Eclipse AVN52D

Brands by name

Popular brands

Fujitsu Eclipse AVN52D, Installation Manual

Search results

Summary of Contents for Eclipse AVN52D

Reviews:

Related manuals for Eclipse AVN52D

Brands by name

Popular brands