manualshive.com logo in svg

Fujitsu DESKPOWER N300 Series, User Manual, Page: 49 / 61

Share
Download
Fujitsu DESKPOWER N300 Series User Manual Download Page 49

34

■

Installing an Additional Serial Port

There are two ways of installing an additional serial port:

1. An additional serial interface can be installed in a rear slot cover plate like a board. The condition

is that the mainboard has a free internal serial port.

Install the rear slot cover plate with the serial port like a board (see "Installing and removing a

board").

Connect the cable of the additional serial port to the connector on the mainboard.

2. An installation opening for the serial port is provided on the rear panel of the casing. As a result, no

board slot is occupied when a second serial port is installed.

Insert a screwdriver into the opening and break out the pre-stamped installation opening by moving

it backwards and forwards.

Fasten the serial port with the screws.

Connect the cable of the additional serial port to the connector on the mainboard.

CAPTOWN (27-42)

11/6/02, 6:55 PM

34

Summary of Contents for DESKPOWER N300 Series






























































Reviews:

No comments