12
Technical Manual
D2779
(TX100
S2)
Notes on safety
Important information
V
CAUTION!
●
Components can become very hot during operation. Ensure you do
not touch components when making extensions to the system board.
There is a danger of burns!
●
Transmission lines to peripheral devices must be adequately
shielded.
●
Ethernet cabling has to comply with EN 50173 and EN 50174-1/2
standards or ISO/IEC 11801 standard respectively. The minimum
requirement is a Category 5 shielded cable for 10/100 Ethernet, or
Category 5e for Gigabit Ethernet.
●
Never connect or disconnect data transmission lines during a
thunderstorm (risk of lightning hazard).
Batteries
V
CAUTION!
Incorrect replacement of batteries may lead to a risk of explosion. The
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer.
This information does not apply to the Japanese market.
It is essential to observe the instructions in the
chapter "Replacing the
lithium battery"
.
