22
Technical Manual
D2619-N (RX/TX300 S6)
Main memory
Features
3.2
Main memory
The system board supports up to 192 GB main memory. 18 slots for main
memory are available. Each slot can be populated with 1 GB, 2 GB single or
dual rank UDIMM or 1 GB, 2 GB, 4 GB, 8 GB, 16 GB single, dual or quad rank
RDIMM memory modules. Besides low-voltage DIMMs are supported. The
minimum population in the Independent Channel Mode is one DIMM.
ECC with memory scrubbing and with the Single Device Data Correction
(SDDC) function is supported.
I
You will find the descriptions how to install memory modules in the
Options Guide of your server.
3.2.1
Module population
Figure 2: Assembly of the main memory in channels and slots
The arrows in
show the direction of the population of the memory slots.
●
The memory modules are organized in 6 channels (A - F). Each channel has
three slots (1-3).
●
The channels A - C are controlled by CPU 1 and the channels D - F are
controlled by CPU 2.
CPU 2
Channel A Channel B Channel C
DI
M
M
-1
D
Channel D
Channel E
Channel F
CPU 1
DIMM 3A
DIMM 3D
DIMM 1C
DIMM 2C
DIMM 3C
DIMM 1B
DIMM 2B
DIMM 3B
DIMM 1A
DIMM 2A
DIMM 1F
DIMM 2F
DIMM 3F
DIMM 1E
DIMM 2E
DIMM 3E
DIMM 1D
DIMM 2D
Summary of Contents for D2619-N
