61
3
Award BIOS Setup Utility
Soft-Off by PWR-BTTN
This category allows you to select the method of powering off your
system.
Hold 4 Sec.
Regardless of whether the Power Management field
is enabled or disabled, if the power button is
pushed and released in less than 4 sec, the system
enters the Suspend mode. The purpose of this
function is to prevent the system from powering off
in case you accidentally hit or pushed the power
button. Push and release again in less than 4 sec to
restore. Pushing the power button for more than 4
seconds will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
Resume on PCI Event
Enabled
Access to a PCI card such as a modem or LAN card
will cause the system to wake up. The PCI card must
support the wake up function.
Disabled
The system will not wake up despite access to the PCI
card.
Resume On Ring
With an external modem installed, the modem ring-on function
will allow your system to power-on to respond to incoming calls.
By default, the Resume on Ring field is Disabled. To use this
function, please follow the steps below.
1. Make sure the computer system is powered off.
2. Connect the external modem to the COM 1 or COM 2
serial port.
3. Switch on the power of the external modem.
4. Power-on the computer system. After the memory test, press
<Del> to enter the BIOS setup utility.
5. Select Power Management Setup and press <Enter>.
6. Set the Resume on Ring field to Enabled.
7. Press <Esc> to return to the main menu of the BIOS setup
utility. Select Save & Exit Setup then press <Enter>.
8. Type <Y> and press <Enter>.
