2
Hardware Installation
17
1. Pull the tabs which are at the ends of the socket to the side.
2. Position the DIMM above the socket with the notches in the
module aligned with the keys on the socket.
3. Seat the module vertically into the socket. Make sure it is
completely seated. The tabs will hold the DIMM in place.
Pin 1
Notch
Key
Tab
Tab
2.2.1 Installing the DIM Module
A DIM module simply snaps into a DIMM socket on the system
board. Pin 1 of the DIM module must correspond with Pin 1 of the
socket.
Display Cache (CW35-E and CW35-D only)
The CW35-E and
CW35-D system
boards are each
mounted with 2
SDRAMs that serve as
4MB display cache. The
presence of the display
cache will provide
better system perform-
ance.
