System expansions
It may be necessary to modify the entry for the drive in the
BIOS Setup
.
Installing/removing the SmartCard reader and/or
WLAN module (optional, 3½-Zoll)
You can also install a SmartCard reader and/or a WLAN module for wireless LAN (Local Area
Network) or a memory card reader in the drive bays for 3½ inch drives (see
installing the memory card reader (optional, 3½ inch, MultiCard)", Page 44
The SmartCard reader and WLAN module can be installed together in one
module holder (optional). If you have ordered a device with a WLAN module
and SmartCard reader, the module holder, SmartCard reader and WLAN
module will already be installed at the time of delivery.
However, you can only install one of the two boards. The WLAN module is installed
in the lower slot of the carrier and the SmartCard reader in the upper slot of the
carrier. If you want to install the SmartCard reader and the WLAN module together,
fi
rst install the WLAN module. Removal is performed in the reverse order.
If you have ordered a device without a WLAN module or SmartCard reader,
a blind cover is installed instead of the module holder.
Installing/removing a 3½" reader in a 3½" bay
(optional, SmartCard or MultiCard)
The following chapter illustrates the standard version and not the power version. However,
the procedure in the following chapters is the same for both versions.
Operation of the module is not permitted in Taiwan.
You can for instance install a SmartCard or MultiCard reader in the 3½" drive bay. The
reader is mounted onto a module holder when installed in the casing.
SmartCard or MultiCard readers can be mounted on a module holder (optional).
If you have ordered a device with a SmartCard or MultiCard reader, the module
holder, SmartCard or MultiCard reader are already built in on delivery.
If you have ordered a device without a SmartCard or MultiCard reader, a
blind cover is installed instead of the module holder.
Fujitsu
39