Working with the notebook
Installing a battery
1
►
Position the battery at the edge.
►
Push the battery into the battery slot until you feel it lock into place (1).
►
Complete the removal, see chapter
"Finishing component removal", Page 73
.
Optical drive
Opticaldrive
This product contains a light emitting diode, classi
fi
ed in accordance with IEC
8251:1993: LASER CLASS 1, and must therefore not be opened.
Handling data carriers
Handling
Observe the following guidelines when handling data carriers:
•
Avoid touching the surface of a data carrier. Only handle data carriers by their edges.
•
Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
•
Protect your data carriers against dust, mechanical vibrations and direct sunlight.
•
Avoid storing a data carrier in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm data carriers in the optical drive.
When using a data carrier of lesser quality, vibrations and reading errors may occur.
32
Fujitsu Technology Solutions
Summary of Contents for CELSIUS H910
Page 1: ...System Operating Manual CELSIUS H910 ...
Page 3: ......
