Fujitsu CELSIUS H780 Operating Manual Download Page 43

Page: 43 / 95

Working with the notebook

SIM card

A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
notebook to enable access to a mobile radio network in conjunction with an installed UMTS module.

Follow the instructions supplied by the provider of the SIM card.

The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.

Inserting the SIM card

The device support cards in micro-SIM format (15 mm x 12 mm).

► Prepare for installation of the SIM card, see chapter

"Preparing to remove components", Page 64

► Remove the battery, see

"Removing a battery", Page 33

► Slide the SIM card into the slot (1) until you hear it engage, as shown in

the diagrams on the battery compartment.

► Install the battery again, see

"Installing a battery", Page 34

► Complete the installation, see chapter

"Finishing component removal", Page 73

Fujitsu

Summary of Contents for CELSIUS H780
































































































Search results

Summary of Contents for CELSIUS H780

Reviews:

Fujitsu CELSIUS H780, Operating Manual, Page: 43 / 95

Search results

Summary of Contents for CELSIUS H780

Reviews: