Opening and terminating BS2000 dialog
Power-on, starting up BS2000, shutdown
38
U41857-J-Z125-1-76
3.6 Opening and terminating BS2000 dialog
You perform administration tasks in the BS2000 system in a dialog task. To start a dialog
task you require a dialog window in which you can log into the BS2000 system. You can log
in on the BS2000 system as soon as BS2000’s data communication system has started.
Ê
Iconize the opened console window and switch once more to the main window of the
SE Manager.
That is where the
Operation
tab of the BS2000 system which was previously started was
most recently opened (take note of
„Logging out because of a session timeout“ auf
Seite 17
).
Ê
In the
Console and dialog
group, click
Open
in the
BS2000
dialog
function.
A BS2000 dialog window opens.
...........................................
CN04 CONNECTED WITH MANLO1$DIALOG;IND=C'::'
% JMS0150 INSTALLATION '390SU- 700-20', BS2000 VERSION 'V190', HOST
'D020ZE01': PLEASE ENTER '/SET-LOGON-PARAMETERS' OR '?'
/
set-logon-parameters ....
LTG TAST
After you have logged in successfully using the /SET-LOGON-PARAMETERS command,
you can enter commands and perform your tasks in BS2000.
I
To complete an entry, click the
[DUE1]
key in the key panel of the virtual keyboard
or press the Enter key on your keyboard.