Fujitsu BR5450, Hardware Reference Manual

Page: 17 / 69

4 Brocade 5450 Hardware Reference Manual
53-1001266-02
Hardware Description
1
•
For static POD, Table 1 shows the 14 base internal and external ports that are licensed. In
static mode, you cannot move licenses from one port to another.
Hardware Description
This section describes the physical Embedded Switch Module as shipped from the factory. For
specifications, such as installed memory, weight and physical dimensions, facility requirements,
architectural specifications, and regulatory compliance, refer to
Appendix A, “Embedded Switch
Module specifications”
Front panel
Externally accessible ports and LEDs are on the port side of the Embedded Switch Module. The
front panel faces out when the Embedded Switch Module is inserted into the
I/O bay of the Blade
Server chassis
. Figure 1 details the front panel. For a complete description of the locations and
interpretations of these LEDs, see “Interpreting LED activity” on page 37.
Access the I/O module handle at the front of the port side of the Embedded Switch Module. By
pressing the handle’s release latch, you can open the handle to remove and insert the unit from
the Blade Server chassis.
FIGURE 1
Front panel view
1. Module locator
2. Health indicator
3. Module status indicator
4. Port status indicators (See “Interpreting LED activity” on page 37.)
The Embedded Switch Module has a Reset button. The Reset button is a small, recessed
micro-switch that is accessed by inserting a pin (or an object of similar size) into the small hole.
Depress the Reset button for up to five seconds to reboot the Embedded Switch Module.
TABLE 1 Ports available with Static POD
Port Licensing External Ports Internal Ports
Base 19, 20, 21, 22 1 through 10
POD 0, 23, 24, and 25 11 through 18
1 4
2
3