Operation
Function
Description
Auto Brightness
Enable/disable automatic control of the brightness
This function is used to automatically control the brightness of the
background lighting using the ambient light sensor.
This setting only appears on models with an ambient light sensor and can
only be enabled in
Of
fi
ce
,
Photo
or
Custom
mode.
As soon as
Auto brightness
is enabled,
ACR
is automatically disabled
Lighting Guide
Enable/disable advice on workplace lighting
With this function, advice is displayed if the ambient light at the workplace
does not meet the ergonomic recommendations for working at the computer
screen.
This setting only appears on models with a light sensor.
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
Press the
button to run the function.
This setting only appears with an analogue video signal (e.g. VGA).
Deactivate the
ACR
function to achieve an optimised screen appearance.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
►
Press the
button and the ON/OFF button at the same time and
keep them pressed for several seconds.
The message
OSD locked / unlocked
is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Lock the ON/OFF button
The ON/OFF button can be locked to prevent accidental or unauthorised
changes to the monitor settings.
►
Press the buttons
and
at the same time and keep them pressed for a few seconds.
The message
Power button locked / unlocked
is displayed.
To remove the locking of the ON/OFF button again, proceed in the same way.
34
Fujitsu
