Fujitsu AWYZ14LBC, Operating Manual

Page: 10 / 26

En-9
SWING OPERATION
Begin air conditioner operation before performing this procedure.
To select SWING Operation
Open the Remote Controller lid to perform swing operation
settings.
Press the SWING button (Fig. 5
i ).
The SWING Display (Fig. 6 U ) will light.
Each time the SWING button is pressed, the swing operation will change in the
following order.
To stop SWING Operation
Press the SWING button (Fig.5 i ) and select STOP.
Airflow direction will return to the setting before swing was begun.
Up/down swing operation Left/right swing operation
Swing operation stops Up/down/left/right swing operation
About Swing Operation
●
Up/down swing: Swing operation begins using the
following range according to the current airflow direc-
tion.
Airflow direction is 1–4 (for cooling, dry).
With the upper airflow-direction louver in the
horizontal position, the lower airflow-direction
louver moves (swings) to direct airflow to a wide
area.
Airflow direction is 5–8 (for heating).
With the airflow-direction louvers set for down-
ward or straight down airflow, airflow is directly
mainly at the floor.
●
Left/right swing: The airflow-direction louvers move
(swing) in the left/right airflow direction.
●
Up/down/left/right swing: The airflow-direction louvers
move (swing) in both the up/down and left/right airflow
directions.
●
The SWING operation may stop temporarily when the
air conditioner’s fan is not operating, or when operating
at very low speeds.
●
If the AIR DIRECTION (Up-Down) button is pressed
during the up/down swing operation, the up/down
swing operation will stop and if the AIR DIRECTION
(Left-Right) button is pressed during the left/right swing
operation, the left/right swing operation will stop.