Fujitsu AVN6000 Installation Manual Download Page 8

Page: 8 / 16

- 8 -

VCR output terminals

Connect to a monitor with video input.

Yellow : Video signal

White : Audio(left) signal

Red : Audio(right) signal

VCR input terminals

Connect to the output wire of an external video main unit such as a VCR.

Yellow : Video signal

White : Audio (left) signal Red : Audio (right) signal

Main unit connections

ACC ON/OFF power supply terminal (blue/white)

If you use this terminal to connect a main unit such as an external amplifier, you can still hear the audio guidance

from the navigation system even when audio is turned off. Connect it to the control terminal for the external

amplifier or other main unit.

※

A popping noise may be heard when the engine is being started or the ignition switch is at the ON position, but

this is normal and is not the sign of a malfunction.

Back-eye camera external input terminal (4P)

Used with the Eclipse back-eye camera (sold separately).

E-LAN terminal (13P)

Connect to the E-LAN terminal of a CD changer, etc.

Summary of Contents for AVN6000

















Search results

Summary of Contents for AVN6000

Reviews:

Related manuals for AVN6000

Brands by name

Popular brands

Fujitsu AVN6000, Installation Manual

Search results

Summary of Contents for AVN6000

Reviews:

Related manuals for AVN6000

Brands by name

Popular brands