background image

En-11

AIR CONDITIONER Wall Mounted Type

OPERATING MANUAL

Cleaning and Care (continued)

Air cleaning filter installation

1

  Open the intake grille and remove the air filters.

Air filter (Right & Left)

2

  Install the air cleaning filter set (set of 2)

.

  (1) Set the air cleaning filter into the air cleaning filter frame.

Air cleaning filter

Air cleaning filter frame

  (2) Engage the latch at both ends of the filter with the two hooks 

at the rear of the air cleaning filter frame.

Hook (2 places at the rear)

Latch (2 places)

Take care that the air cleaning filter does not project beyond the 

frame.

  (3) Engage the six fixing locations at the top and bottom of the air 

cleaning filter frame with the hooks of the air filter.

Rear of the filter

Fixing location, 

hook (6 places)

3

  Install the two air filters and close the intake grille.

• 

When air cleaning filters are used, the effect will increased by 

setting the fan speed to “HIGH”.

Replacing dirty air cleaning filters

Replace filters with the following components (purchased separately).

• 

APPLE-CATECHIN FILTER: UTR-FA13-1

• 

ION DEODORIZATION FILTER: UTR-FA13-2

1

  Open the intake grille and remove the air filters.

2

  Replace them by two new air cleaning filters.

  (1) Remove the old air cleaning filters in reverse order of their 

installation.

  (2) Install in the same way as for installation of the air cleaning 

filter set.

3

  Install the two air filters and close the intake grille.

[In regard to the air cleaning filters]

APPLE-CATECHIN FILTER (1 sheet)

• 

The filters are disposable filters. (They can not be washed and 

reused.)

• 

For storage of the filters, use the filters as soon as possible after the 

package has been opened.

(The air cleaning effect decreases when the filters are left in the 

opened package)

• 

Generally, the filters should be exchanged about every 3 months.

Please buy dedicated APPLE-CATECHIN FILTER (UTR-FA13-1) 

(Sold separately) to exchange the used dirty air cleaning filters.

ION DEODORIZATION FILTER (1 sheet) - light blue

• 

The filters should be exchanged about every 3 years so as to 

maintain the deodorizing effect.

Please buy dedicated ION DEODORIZATION FILTER (UTR-FA13-2) 

(Sold separately) when exchanging the filters.

[Maintenance of ION DEODORIZATION FILTER]

In order to maintain the deodorizing effect, please clean the filter in the 

following way every 3 months.

1.

  Remove the filter.

2.

  Clean with water and dry in the air.

  (1) Flush the filters with high-pressure hot water until the surface 

of the filters are covered with water. Please flush with diluent 

neutral detergent.

(Never wash by reaming or rubbing, otherwise it will damage 

the deodorizing effect.)

  (2) Rinse with water flow.

  (3) Dry in shade.

3.

  Reinstall the filter.

After extended non-use of the unit

If you have shut down the indoor unit for 1 month or more, perform the 

FAN operation for half a day to dry the internal parts throughly before 

you perform normal operation.

Additional inspection

After long period of use, accumulated dust inside the indoor unit may 

reduce the product performance even if you have maintained the unit 

with instructed daily care or cleaning procedures written in this manual.
In such a case, a product inspection is recommended.
For more information, consult authorized service personnel.

9387081152_OM.indd   11

31-Mar-17   10:10:38

Summary of Contents for ASTG30CMTB













Reviews: