9
To Cancel the Timer:
Use the TIMER MODE button to select
“CANCEL”.
The air conditioner will return to normal
operation.
To Stop the Air Conditioner During
Timer Operation:
Press the START/STOP button.
SLEEP TIMER OPERATION
Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.
To Use the SLEEP Timer
While the air conditioner is operating or stopped, press the
SLEEP button (Fig. 6
J
).
The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3
5
) lights and the TIMER
Indicator Lamp (green) (Fig. 3
6
) light.
To Change the Timer Settings
Press the SLEEP button (Fig. 6
J
) once again and set the time
using the TIMER SET (
/
) buttons (Fig. 6
O
).
Set the time while the Timer Mode Display is
fl
ashing (the
fl
ashing will continue about
fi
ve seconds).
button:
Press to advance the time.
button:
Press to reverse the time.
About
fi
ve seconds later, the entire display will reappear.
About the SLEEP Timer
To prevent excessive cooling during sleep, the SLEEP timer function automatically modi
fi
es the temperature setting in accordance with
the set time setting. When the set time has elapsed, the air conditioner completely stops.
During Cooling/Dry operation:
When the SLEEP timer is set, the temperature setting is automatically raised 1 °C every sixty minutes. When the temperature has been
raised a total of 2 °C, the temperature setting at that time is maintained until the set time has elapsed, at which time the air conditioner
automatically turns off.
SLEEP timer setting
MANUAL AUTO OPERATION
Use the MANUAL AUTO operation in the event the Remote Controller is lost or otherwise unavailable.
How To Use the Main Unit Controls
Press the MANUAL AUTO button (Fig. 2
2
) on the main unit
control panel.
To stop operation, press the MANUAL AUTO button (Fig. 2
2
) once again.
(Controls are located inside the intake grille)
●
When the air conditioner is operated with
the controls on the Main Unit, it will oper-
ate under the same mode as the AUTO
mode selected on the Remote Controller
(see page 7).
●
The fan speed selected will be “AUTO”
and the temperature setting will be stand-
ard.(24
°C
)
Set time
1 hour
1 ˚C
2 ˚C
9315345462_OM.indb 9
9315345462_OM.indb 9
6/23/2011 9:06:01 AM
6/23/2011 9:06:01 AM
