Fujitsu AOTG09LUC Operating Manual Download Page 9

8

Vertical Air Direction Adjustment

Press the SET button 

 .

Each time the button is pressed, the air direction range will change as follows:

 1 

 2 

 3 

 4 

 5 

 6 

 7 

Types of Air

fl

 ow Direction Setting:

1, 2, 3 : During Cooling/Dry
4, 5, 6, 7 : During Heating

The Remote Controller's display does not change.

  Use the air direction adjustments within the ranges shown above.

 The vertical air

fl

 ow direction is set automatically as shown, in accordance with the 

type of operation selected.
 During 

Cooling/Dry : Horizontal 

fl

 ow 1

  During Heating 

: Downward 

fl

 ow 6

 During AUTO mode operation, for the 

fi

 rst a few minutes after beginning operation, 

air

fl

 ow will be horizontal 1; the air direction cannot be adjusted during this period.

 The 

air

fl

 ow direction setting will temporarily become 1 when the temperature of the 

air

fl

 ow is low at the start of the Heating mode.

Right-Left Adjustment

Adjust the Right-Left louvers.

  Move the Right-Left louvers to adjust air

fl

 ow in the direction you prefer.

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Vertical (up-down) direction of air

fl

 ow is adjusted by pressing the Remote Controller's SET button. Horizontal (right-left) air

fl

 ow direc-

tion is adjusted manually, by moving the Air

fl

 ow Direction Louvers.

Whenever making horizontal air

fl

 ow adjustments, start air conditioner operation and be sure that the vertical air direction louvers are 

stopped.

 

DANGER!

 Never place fingers or foreign objects in-

side the outlet ports, since the internal fan 
operates at high speed, and personal injury 
could be caused.

  Always use the Remote Controller's 

SET button to adjust the vertical air

fl

 ow 

louvers. Attempting to move them man-
ually could result in improper operation; 
in this case, stop operation and restart. 
The louvers should begin to operate 
properly again.

  During use of the Cooling and Dry 

modes, do not set the Airflow Direc-
tion Louvers in the Heating range 
(4 - 7) for many hours, since water 
vapor may condense near the outlet 
louvers and drops of water may drip 
from the indoor unit. During the Cooling 
and Dry modes, if the Air

fl

 ow  Direction 

Louvers are left in the heating range for 
more than 30 minutes, they will auto-
matically return to position 3.

  When used in a room with infants, chil-

dren, elderly or sick persons, the air

fl

 ow 

direction and room temperature should 
be considered carefully when making 
settings.

 

CAUTION!

 When adjusting the Right-Left Louvers, it 

is necessary to stop the Vertical (up-down) 
louvers first and make sure that it stops 
completely before adjusting the direction.

1

2

3

4

5

6

7

SWING OPERATION

The product moves the air

fl

 ow vents up and down to move cool or warm air around all parts of the room.

To select SWING Operation

Press the SWING button 

 .

The SWING Display “

” will light.

In this mode, the Air

fl

 ow Direction Louvers will swing automatically to direct the air

fl

 ow 

both up and down.

To stop SWING Operation

Press the SWING button 

 once again.

The SWING Display “

” will go out.

Air

fl

 ow direction will return to the setting before swing was begun.

About SWING Operation

During Cooling/Dry  : Swings between 1 and 4.
During Heating 

: Swings between 4 and 7.

  The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.

Right-Left Louvers

Knob

Knob (2 places) 

9319356020_OM_EN.indd   8

9319356020_OM_EN.indd   8

7/18/2011   1:39:07 PM

7/18/2011   1:39:07 PM

Summary of Contents for AOTG09LUC

























Reviews: